Cenxi private car charging pile price
DC piles are the inevitable choice of public piles in the future: at present, the proportion of public AC and DC charging piles remains around 6:4, and the proportion of AC piles is more, mainly because in the early stage of the industry development, slow charging AC piles are very suitable for manufacturers to seize the market, relying on the characteristics of simple structure, mature technology and low cost, However, after the technology and market of charging piles become mature, DC piles are the inevitable choice for future public charging piles. The average charging time of the DC charging pile is 1 hour and 54 minutes. 85% of the users can finish charging within 2.5 hours, while the average charging time of the AC charging pile is 5 hours and 45 minutes. 66.2% of the users need more than 5 hours of lengthy charging time. The difference between the two nearly 4 hours of time directly determines the obvious use preference of the car owner Z.
Cenxi private car charging pile price
When the charging post is built, it should be used and managed well. The implementation of management responsibility and clear operation mode can make the charging pile safe and reliable. At present, the charging pile is faced with the problem of unclear management responsibility and unclear operation mode. There are some problems such as the aging of distribution facilities in the community, who will pay for the reconstruction, the quality of piles is mixed, and who will solve the hidden fire hazards. The same is true of public charging posts. There are not many DC fast charging piles with high investment standards and high power, but "problem piles" and "zombie piles" are common. In recent years, the number of charging pile construction and operators in China has grown rapidly, but the level of enterprises is uneven.
Cenxi private car charging pile price
9. Anti rust (anti oxidation) protection The iron shell of the charging pile (bolt) and the exposed iron support and parts shall be provided with double-layer anti rust measures, and the non-ferrous metal shell shall also be provided with anti oxidation protective film or anti oxidation treatment; 10. The wind protection charger installed on the platform and exposed parts shall be able to withstand the relative wind speed in different areas and at different heights specified in Table 9 of GB/T 4797.5-9 Natural Environmental Conditions for Electrical and Electronic Products - Precipitation and Wind; 11. The shell door of the anti-theft protection electric pile (bolt) shall be equipped with an anti-theft lock, and the bolt fixing the AC charging pile (bolt) must be installed or removed after opening the shell door; 12. The temperature rise requires that the AC charging pile (plug) operates continuously under rated load for a long time, and the temperature rise of internal heating elements and parts shall not exceed the provisions in Table 2 of Q/GDW 397 2009;
Cenxi private car charging pile price
Charging or changing? It is difficult to break through the pain points of the construction of power exchange stations: the construction speed of power exchange stations is amazing. From August 2019 to December 2020, the number of power exchange stations has increased from 245 to 734 in more than a year. The top three operators are respectively Aodong, Weilai and Botan, 286, 175 and 94. The electric vehicle power change mode refers to the centralized storage, charging and distribution of a large number of batteries through a centralized charging station, and the battery replacement service for electric vehicles in the battery distribution station or the integration of battery charging, logistics allocation and power change services. However, the pain point of the power exchange mode is still the bottleneck that is difficult to break through.
Cenxi private car charging pile price
The scheme of the charger in the ground charging station, which is composed of a rectifier that can convert the input AC power into DC power and a power converter that can adjust the DC power. By inserting the plug with wires into the supporting socket on the electric vehicle, DC power is input into the battery to charge it. The charger is equipped with a locking lever to facilitate the insertion and removal of the plug. At the same time, the lever can also provide a signal to confirm that it has been locked to ensure safety. According to the communication between the charger and the on-board battery management system, the power converter can adjust the DC charging power online, and the charger can display the charging voltage, charging current, charging amount and charging cost. This is just the basic principle of the charging pile. Many details should be constantly improved in practical application, and a convenient use scheme has been obtained.
Cenxi private car charging pile price
In addition, according to the different ways of energy conversion when charging the electric vehicle battery, charging devices can be divided into contact type and induction type. With the rapid development of power electronics technology and converter control technology, the maturity and popularization of high-precision controllable converter technology, the phased constant current charging mode has been basically replaced by the constant voltage current limiting charging mode with continuous changes in charging current and charging voltage. The constant voltage current limiting charging mode dominates the charging process. The big problem of contact charging is its safety and versatility. In order to make it meet the strict safety charging standard, many measures must be taken in the circuit to enable the charging equipment to charge safely in various environments. Constant voltage current limiting charging and phased constant current charging are both contact charging technologies. New induction charging technology for electric vehicles has developed rapidly.
