Guiyang private car charging pile products
The scheme of the charger in the ground charging station, which is composed of a rectifier that can convert the input AC power into DC power and a power converter that can adjust the DC power. By inserting the plug with wires into the supporting socket on the electric vehicle, DC power is input into the battery to charge it. The charger is equipped with a locking lever to facilitate the insertion and removal of the plug. At the same time, the lever can also provide a signal to confirm that it has been locked to ensure safety. According to the communication between the charger and the on-board battery management system, the power converter can adjust the DC charging power online, and the charger can display the charging voltage, charging current, charging amount and charging cost. This is just the basic principle of the charging pile. Many details should be constantly improved in practical application, and a convenient use scheme has been obtained.
Guiyang private car charging pile products
9. Anti rust (anti oxidation) protection The iron shell of the charging pile (bolt) and the exposed iron support and parts shall be provided with double-layer anti rust measures, and the non-ferrous metal shell shall also be provided with anti oxidation protective film or anti oxidation treatment; 10. The wind protection charger installed on the platform and exposed parts shall be able to withstand the relative wind speed in different areas and at different heights specified in Table 9 of GB/T 4797.5-9 Natural Environmental Conditions for Electrical and Electronic Products - Precipitation and Wind; 11. The shell door of the anti-theft protection electric pile (bolt) shall be equipped with an anti-theft lock, and the bolt fixing the AC charging pile (bolt) must be installed or removed after opening the shell door; 12. The temperature rise requires that the AC charging pile (plug) operates continuously under rated load for a long time, and the temperature rise of internal heating elements and parts shall not exceed the provisions in Table 2 of Q/GDW 397 2009;
Guiyang private car charging pile products
In this environment, major automobile manufacturers in the automobile industry are also constantly shifting their focus to the research and development of new energy vehicle technology, and have also launched many new energy vehicles to replace oil with electricity and reduce emissions. This also represents the new direction of future automobile development. In China, friends who pay more attention to cars can see that more and more new energy vehicles are running on the road. More people are also aware of the benefits that new energy vehicles bring to the earth. The country is also introducing various preferential policies to vigorously promote the development of new energy vehicles. However, the main reason why some people are unwilling to buy new energy vehicles is the lack of endurance and inconvenient charging. However, with the continuous popularity of electric vehicles, these problems will certainly be solved in the future. Previously, the country also made a series of decisions in order to facilitate the charging of cars in the future.
Guiyang private car charging pile products
On board charging device refers to the device installed on the electric vehicle that uses the ground AC power grid and the on-board power supply to charge the battery pack, including the on-board charger (Figure 1-13), the on-board charging generator set and the operating energy recovery charging device. A AC power cable with a plug is directly inserted into the charging socket of the electric vehicle to charge the battery. On board charging devices usually use contact chargers with simple structure and convenient control, or inductive chargers. It is designed completely according to the type of on-board battery, with strong pertinence. Off board charging device, i.e. ground charging device, mainly includes special charger, special charging station, general charger, charging station for public places (Figure 1-14), etc. It can meet various charging modes of various batteries. Generally, the off board charger has large power, volume and weight to adapt to various charging modes.
