Where is Guiping private car charging post
6. Safety protection function: ① The AC charging pile (bolt) shall be equipped with an emergency stop switch, which can be used to stop charging manually or by remote communication; ② The AC charging pile (bolt) shall have the leakage protection function at the output side; ③ AC charging pile (plug) shall have output side overcurrent and short circuit protection functions; ④ AC charging post (bolt) shall have flame retardant function; 7. IP protection level: AC charging pile (plug) shall comply with IP54 (outdoor), and be equipped with necessary rain proof and sun protection devices; 8. Three proofing (anti moisture, anti mildew, and anti salt fog) protection The printed circuit board, connector and other circuits in the charger shall be treated against moisture, mildew, and salt fog. The salt fog corrosion resistance shall meet the requirements in Table 9 of GB/T 4797.6-1995 Natural Environmental Conditions for Electrical and Electronic Products Dust, Sand, and Salt Fog, so that the charger can be wet Normal operation in the environment with salt fog;
Where is Guiping private car charging post
Not only does China attach importance to the development of new energy charging equipment, foreign new energy companies are developing more rapidly, and French oil giant Total is also actively building charging equipment. In the early years, Total acquired Saft, a battery manufacturer. This company originally produced power batteries and provided automotive batteries for many automobile manufacturers. And some foreign companies have even developed wireless charging technology. They transmit wireless energy through magnetic induction between the charging coil and the receiver. The charging coil is buried under the ground. When it needs to be charged, just drive the car to an appropriate position to charge. New energy vehicles are very popular in recent years. Because of the environmental protection of new energy vehicles, many countries advocate new energy vehicles, and many people are interested in new energy vehicles. The New Energy Vehicle Technology Analysis has relevant content. Obviously, the trend of fuel vehicles has gone.
Where is Guiping private car charging post
The country attaches great importance to the development of new energy vehicle charging equipment, and all regions will naturally increase efforts to promote development. Taking Nanning as an example, it is estimated that by 2020, there will be about 21550 new energy vehicles in Nanning. In order to meet the charging needs of the majority of car users, by 2020, Nanning will need nearly 20000 charging poles and nearly 100 charging stations. At present, the development of electric vehicle public charging equipment in Nanning is still in the primary stage. At present, the number of electric vehicles and the number of charging piles are seriously unbalanced, and the phenomenon of vehicles without piles and piles without vehicles occurs from time to time. The main reason is that the all smart service platform has not been built yet and needs further improvement.
Where is Guiping private car charging post
At present, solar cells are divided into several types according to the raw materials, structures and manufacturing methods used. Among them, crystalline silicon solar cells mostly refer to monocrystalline silicon solar cells and polycrystalline silicon solar cells using silicon semiconductor substrates as raw materials; In addition, there are amorphous silicon solar cells, which are made by evaporating amorphous silicon on glass substrates rather than silicon substrates based on the same film preparation method as liquid crystal panels. Monocrystalline silicon solar cells form solar cells on monocrystalline silicon substrates, and there are also products with conversion efficiency up to about 20%, which have excellent performance and reliability. However, the price of silicon substrate as raw material is expensive, and the power generation cost per watt is high. Although the conversion efficiency of polycrystalline silicon solar cells is lower than that of monocrystalline silicon solar cells, they have the advantage of relatively low cost.
Where is Guiping private car charging post
The scheme of the charger in the ground charging station, which is composed of a rectifier that can convert the input AC power into DC power and a power converter that can adjust the DC power. By inserting the plug with wires into the supporting socket on the electric vehicle, DC power is input into the battery to charge it. The charger is equipped with a locking lever to facilitate the insertion and removal of the plug. At the same time, the lever can also provide a signal to confirm that it has been locked to ensure safety. According to the communication between the charger and the on-board battery management system, the power converter can adjust the DC charging power online, and the charger can display the charging voltage, charging current, charging amount and charging cost. This is just the basic principle of the charging pile. Many details should be constantly improved in practical application, and a convenient use scheme has been obtained.
