Luzhou Guangxi Charging Pile Project

Functional features: 1. Provide human-computer interaction; Provide DC and AC charging interfaces; 2. With voice prompt function; With card swiping function; 3. It has the function of printing vouchers; 4. Real time communication with BMS to obtain information such as power battery type, unit voltage, residual capacity, temperature and alarm; 5. Generate control commands and switch signals to the charger, control the start and stop of the charger, and obtain the status information of the charger; 6. Complete safety protection control logic such as connection state judgment, interlocking, control guidance of charging interface; 7. With CAN2.0B and RS485 communication interfaces, it can communicate with centralized monitoring and submit charging status information; 8. It has the protection functions of electric leakage, short circuit, overvoltage, undervoltage, overcurrent, etc. to ensure the safe and reliable operation of the charging pile (plug); The protection grade is IP54.

Luzhou Guangxi Charging Pile Project

The control circuit of the electric vehicle charging pile (plug) is mainly completed by the embedded ARM processor. Users can swipe their cards to carry out user authentication, balance query, billing query and other functions, and can also provide voice output interface to achieve voice interaction. The user can select four charging modes according to the indication of the LCD screen: charging on time, charging according to the quantity of electricity, automatic charging, charging according to the mileage, etc. The electric vehicle charger controller and concentrator use CAN bus for data interaction, and the concentrator and server platform use wired Internet or wireless GPRS network for data interaction. For security reasons, the electricity billing and amount data are encrypted securely.

Luzhou Guangxi Charging Pile Project

Both the mileage and the number of charging posts have made great progress over the previous years. According to the reporter, at present, the driving range of the mainstream models of new energy vehicles and passenger vehicles in China has reached more than 300 kilometers, which is in line with the international advanced level. The energy density of the single power battery of the leading enterprise has reached 2 watt hours per kilogram, and the price has reached 1.2 yuan per watt hour. These two indicators have respectively increased by two times and decreased by 70% compared with 2012. At the same time, the construction of charging network is progressing steadily, and the coverage of public places, residential quarters, internal units, highways and other major places is increasing significantly. By the end of 2017, 214000 public piles had been built nationwide, an increase of 51% year on year, ranking first in the world in terms of ownership, and the installation rate of new users' private piles exceeded 80%.

Luzhou Guangxi Charging Pile Project

9. Anti rust (anti oxidation) protection The iron shell of the charging pile (bolt) and the exposed iron support and parts shall be provided with double-layer anti rust measures, and the non-ferrous metal shell shall also be provided with anti oxidation protective film or anti oxidation treatment; 10. The wind protection charger installed on the platform and exposed parts shall be able to withstand the relative wind speed in different areas and at different heights specified in Table 9 of GB/T 4797.5-9 Natural Environmental Conditions for Electrical and Electronic Products - Precipitation and Wind; 11. The shell door of the anti-theft protection electric pile (bolt) shall be equipped with an anti-theft lock, and the bolt fixing the AC charging pile (bolt) must be installed or removed after opening the shell door; 12. The temperature rise requires that the AC charging pile (plug) operates continuously under rated load for a long time, and the temperature rise of internal heating elements and parts shall not exceed the provisions in Table 2 of Q/GDW 397 2009;