Dujiangyan Guangxi Charging Pile Service Center
At present, solar cells are divided into several types according to the raw materials, structures and manufacturing methods used. Among them, crystalline silicon solar cells mostly refer to monocrystalline silicon solar cells and polycrystalline silicon solar cells using silicon semiconductor substrates as raw materials; In addition, there are amorphous silicon solar cells, which are made by evaporating amorphous silicon on glass substrates rather than silicon substrates based on the same film preparation method as liquid crystal panels. Monocrystalline silicon solar cells form solar cells on monocrystalline silicon substrates, and there are also products with conversion efficiency up to about 20%, which have excellent performance and reliability. However, the price of silicon substrate as raw material is expensive, and the power generation cost per watt is high. Although the conversion efficiency of polycrystalline silicon solar cells is lower than that of monocrystalline silicon solar cells, they have the advantage of relatively low cost.
Dujiangyan Guangxi Charging Pile Service Center
Charging every day: For many commuters, it may be enough to charge the car once every two or three days. However, some experts suggest that you should not try to save time and charge frequently every day, so that the battery can be in a shallow cycle state, which is more conducive to extending the service life. Pay attention to the phenomenon of poor contact between the plugs at both ends of the charging line: poor contact will lead to the heating of the plug, and once the heating time is too long, short circuit may occur, thus damaging the charger and battery. Therefore, the owner needs to check and replace the connector in time.
Dujiangyan Guangxi Charging Pile Service Center
Integrated overview: the fast charging pile (plug) equipment adopts the AC/DC integrated structure. It can realize both DC charging and AC charging. When there are many charging services in the daytime, DC mode is used for fast charging. When there are few users in the charging station at night, AC charging can be used for slow charging. Appearance features: 1. Ergonomic design, taking full account of Chinese characteristics, after installation, the height of the whole machine, the height of the screen, the height of the keyboard, and the height of the charging connector slot are suitable for operation; 2. The form of upper outlet saves half of the operator's physical strength; 3. In consideration of people's usage habits and durability, touch and keyboard are mutually backed up. Touch screen and keyboard are designed to be rain proof and dust-proof; 4. Emergency stop switch with emergency stop; The charging connector placement slot is waterproof; 5m long flexible cable.
Dujiangyan Guangxi Charging Pile Service Center
The function of the charging post is similar to that of the gas dispenser in the gas station. It can be fixed on the ground or wall, installed in public buildings (public buildings, shopping malls, public parking lots, etc.) and residential parking lots or charging stations, and can charge various types of electric vehicles according to different voltage levels. The input end of the charging pile is directly connected with the AC power grid, and the output end is equipped with a charging plug for charging the electric vehicle. Generally, the charging pile provides two charging methods: conventional charging and fast charging. People can use a specific charging card to swipe the card on the human-computer interaction interface provided by the charging pile to print the corresponding charging method, charging time, cost data and other operations. The charging pile display screen can display the charging amount, cost, charging time and other data.
