Luzhou Guangxi Charging Pile Model
6. Safety protection function: ① The AC charging pile (bolt) shall be equipped with an emergency stop switch, which can be used to stop charging manually or by remote communication; ② The AC charging pile (bolt) shall have the leakage protection function at the output side; ③ AC charging pile (plug) shall have output side overcurrent and short circuit protection functions; ④ AC charging post (bolt) shall have flame retardant function; 7. IP protection level: AC charging pile (plug) shall comply with IP54 (outdoor), and be equipped with necessary rain proof and sun protection devices; 8. Three proofing (anti moisture, anti mildew, and anti salt fog) protection The printed circuit board, connector and other circuits in the charger shall be treated against moisture, mildew, and salt fog. The salt fog corrosion resistance shall meet the requirements in Table 9 of GB/T 4797.6-1995 Natural Environmental Conditions for Electrical and Electronic Products Dust, Sand, and Salt Fog, so that the charger can be wet Normal operation in the environment with salt fog;
Luzhou Guangxi Charging Pile Model
The charging pile body is mainly composed of human-computer interaction unit, control unit, metering unit and safety protection unit. The human-computer interaction unit mainly includes: pile, LCD touch screen, card reading module and charging plug; The control unit mainly includes: main monitoring and auxiliary module; The metering unit is electric energy meter; The safety protection unit includes: leakage protection switch, anti fall switch, emergency stop switch, overvoltage and undervoltage protection unit.
Luzhou Guangxi Charging Pile Model
The control circuit of the electric vehicle charging pile (plug) is mainly completed by the embedded ARM processor. Users can swipe their cards to carry out user authentication, balance query, billing query and other functions, and can also provide voice output interface to achieve voice interaction. The user can select four charging modes according to the indication of the LCD screen: charging on time, charging according to the quantity of electricity, automatic charging, charging according to the mileage, etc. The electric vehicle charger controller and concentrator use CAN bus for data interaction, and the concentrator and server platform use wired Internet or wireless GPRS network for data interaction. For security reasons, the electricity billing and amount data are encrypted securely.
Luzhou Guangxi Charging Pile Model
How to properly charge in the hot link when using the charging pile of new energy vehicles? 1. Take care of your electric donkey and don't let it get sunburnt: in hot summer, you often sweat, and the rechargeable battery often "gets high fever". Here, it is recommended that the owner choose a place with a parking shed or a barrier to cover the electric vehicle as far as possible, and don't let the electric vehicle be exposed to the sun immediately, which will endanger the service life of the vehicle. In addition, fire accidents are very likely to occur under high temperatures. 2. Do not "steam up and cook down": the temperature is already hot. If the electric car is exposed to the sun at the moment, but you are charging the car, the rechargeable battery will generate heat in the whole process of charging. At this time, all cars are in the "steam up and cook down" mode, and you will "deploy" carelessly. 3. The electric vehicle must also take a proper "rest". 4. The charging time must be well controlled.
Luzhou Guangxi Charging Pile Model
The country attaches great importance to the development of new energy vehicle charging equipment, and all regions will naturally increase efforts to promote development. Taking Nanning as an example, it is estimated that by 2020, there will be about 21550 new energy vehicles in Nanning. In order to meet the charging needs of the majority of car users, by 2020, Nanning will need nearly 20000 charging poles and nearly 100 charging stations. At present, the development of electric vehicle public charging equipment in Nanning is still in the primary stage. At present, the number of electric vehicles and the number of charging piles are seriously unbalanced, and the phenomenon of vehicles without piles and piles without vehicles occurs from time to time. The main reason is that the all smart service platform has not been built yet and needs further improvement.
Luzhou Guangxi Charging Pile Model
Although the proportion of new energy vehicles is increasing year by year, its absolute number is much less than that of fuel vehicles. According to the reporter, consumers are dissatisfied with new energy vehicles (mainly pure electric vehicles) mainly in the following two aspects: first, there are relatively few charging piles and charging time is long. Although it is convenient to install by yourself, it is an indisputable fact that in a big city like Beijing, there are only a few parking spaces of their own, and most of them are parked at the roadside. Second, the endurance mileage is not long enough. If you travel far, you will be in trouble once you cannot find the charging post. Chen Qingtai, president of the China Electric Vehicle Hundred People Association, believes that the basis for the rapid growth of electric vehicles is that the cost performance and convenience of electric vehicles should reach or exceed that of fuel vehicles. Therefore, in addition to technological progress, charging infrastructure construction must also keep pace.
