Guilin Guangxi Charging Post Model
The function of the charging post is similar to that of the gas dispenser in the gas station. It can be fixed on the ground or wall, installed in public buildings (public buildings, shopping malls, public parking lots, etc.) and residential parking lots or charging stations, and can charge various types of electric vehicles according to different voltage levels. The input end of the charging pile is directly connected with the AC power grid, and the output end is equipped with a charging plug for charging the electric vehicle. Generally, the charging pile provides two charging methods: conventional charging and fast charging. People can use a specific charging card to swipe the card on the human-computer interaction interface provided by the charging pile to print the corresponding charging method, charging time, cost data and other operations. The charging pile display screen can display the charging amount, cost, charging time and other data.
Guilin Guangxi Charging Post Model
A foreign technology company has given a perfect solution: the solar cone they developed is composed of thousands of triangular solar panels. With a specially designed condenser and rotating cone, they can obtain 20 times more light than before, while maintaining the temperature of the core conversion components within a safe range, greatly improving the energy conversion efficiency. Industry insiders believe that this innovation has practical operational significance for photovoltaic power generation, but large-scale popularization still needs to consider the cost and further technical improvement. In order to popularize the application in any industry, it is essential to continuously reduce the cost. Photovoltaic power generation was once very expensive, but driven by economies of scale, the cost of photovoltaic power generation has been declining in recent years, and now it is very close to parity. All this depends on the continuous innovation of photovoltaic technology.
Guilin Guangxi Charging Post Model
In order to popularize the application in any industry, it is essential to continuously reduce the cost. This is especially true for photovoltaic enterprises that are still in the cold winter. Photovoltaic power generation was once very expensive, but driven by economies of scale, the cost of photovoltaic power generation has been declining in recent years, and now it is very close to parity. All this depends on the continuous innovation of photovoltaic technology. Theoretically, a 1 square meter sunlight exposure surface can generate 1000 watts of energy at most. If you want to increase the total reception of existing solar panels, you must focus the light, which will cause the panel to burn out due to excessive temperature.
Guilin Guangxi Charging Post Model
At present, solar cells are divided into several types according to the raw materials, structures and manufacturing methods used. Among them, crystalline silicon solar cells mostly refer to monocrystalline silicon solar cells and polycrystalline silicon solar cells using silicon semiconductor substrates as raw materials; In addition, there are amorphous silicon solar cells, which are made by evaporating amorphous silicon on glass substrates rather than silicon substrates based on the same film preparation method as liquid crystal panels. Monocrystalline silicon solar cells form solar cells on monocrystalline silicon substrates, and there are also products with conversion efficiency up to about 20%, which have excellent performance and reliability. However, the price of silicon substrate as raw material is expensive, and the power generation cost per watt is high. Although the conversion efficiency of polycrystalline silicon solar cells is lower than that of monocrystalline silicon solar cells, they have the advantage of relatively low cost.
Guilin Guangxi Charging Post Model
9. Anti rust (anti oxidation) protection The iron shell of the charging pile (bolt) and the exposed iron support and parts shall be provided with double-layer anti rust measures, and the non-ferrous metal shell shall also be provided with anti oxidation protective film or anti oxidation treatment; 10. The wind protection charger installed on the platform and exposed parts shall be able to withstand the relative wind speed in different areas and at different heights specified in Table 9 of GB/T 4797.5-9 Natural Environmental Conditions for Electrical and Electronic Products - Precipitation and Wind; 11. The shell door of the anti-theft protection electric pile (bolt) shall be equipped with an anti-theft lock, and the bolt fixing the AC charging pile (bolt) must be installed or removed after opening the shell door; 12. The temperature rise requires that the AC charging pile (plug) operates continuously under rated load for a long time, and the temperature rise of internal heating elements and parts shall not exceed the provisions in Table 2 of Q/GDW 397 2009;
Guilin Guangxi Charging Post Model
Safety requirements (1) The substation shall be equipped with safety bulletin board, warning board, safety signal light and alarm bell. (2) The warning sign of "Stop, High Voltage Danger" shall be hung outside the door of the high-voltage distribution room and transformer room or on the safety column of the substation. The warning signs must face the outside of the fence. (3) There shall be obvious operation instructions on the high-voltage distribution device. The grounding point of the equipment shall have obvious signs. (4) There should be obvious signs of "safe passage" or "emergency exit" in the room. In addition, the layout design of substation and distribution equipment shall facilitate installation, operation, handling, maintenance, test and monitoring. High and low voltage distribution room, transformer room, capacitor room and control room should not have unrelated pipes and lines passing through. New energy vehicles should first focus on cities, but the busy IX region is often short of land, and the cost of land is high. In this regard, the government needs to give preferential policies to promote the construction of charging facilities. The development and operation of electric vehicle charging stations by electric power enterprises have inherent advantages.
