Renhuai Electric Vehicle Maintenance Service Center

Not only does China attach importance to the development of new energy charging equipment, foreign new energy companies are developing more rapidly, and French oil giant Total is also actively building charging equipment. In the early years, Total acquired Saft, a battery manufacturer. This company originally produced power batteries and provided automotive batteries for many automobile manufacturers. And some foreign companies have even developed wireless charging technology. They transmit wireless energy through magnetic induction between the charging coil and the receiver. The charging coil is buried under the ground. When it needs to be charged, just drive the car to an appropriate position to charge. New energy vehicles are very popular in recent years. Because of the environmental protection of new energy vehicles, many countries advocate new energy vehicles, and many people are interested in new energy vehicles. The New Energy Vehicle Technology Analysis has relevant content. Obviously, the trend of fuel vehicles has gone.

Renhuai Electric Vehicle Maintenance Service Center

How to properly charge in the hot link when using the charging pile of new energy vehicles? 1. Take care of your electric donkey and don't let it get sunburnt: in hot summer, you often sweat, and the rechargeable battery often "gets high fever". Here, it is recommended that the owner choose a place with a parking shed or a barrier to cover the electric vehicle as far as possible, and don't let the electric vehicle be exposed to the sun immediately, which will endanger the service life of the vehicle. In addition, fire accidents are very likely to occur under high temperatures. 2. Do not "steam up and cook down": the temperature is already hot. If the electric car is exposed to the sun at the moment, but you are charging the car, the rechargeable battery will generate heat in the whole process of charging. At this time, all cars are in the "steam up and cook down" mode, and you will "deploy" carelessly. 3. The electric vehicle must also take a proper "rest". 4. The charging time must be well controlled.

Renhuai Electric Vehicle Maintenance Service Center

Functional features: 1. Provide human-computer interaction; Provide DC and AC charging interfaces; 2. With voice prompt function; With card swiping function; 3. It has the function of printing vouchers; 4. Real time communication with BMS to obtain information such as power battery type, unit voltage, residual capacity, temperature and alarm; 5. Generate control commands and switch signals to the charger, control the start and stop of the charger, and obtain the status information of the charger; 6. Complete safety protection control logic such as connection state judgment, interlocking, control guidance of charging interface; 7. With CAN2.0B and RS485 communication interfaces, it can communicate with centralized monitoring and submit charging status information; 8. It has the protection functions of electric leakage, short circuit, overvoltage, undervoltage, overcurrent, etc. to ensure the safe and reliable operation of the charging pile (plug); The protection grade is IP54.

Renhuai Electric Vehicle Maintenance Service Center

Safety requirements (1) The substation shall be equipped with safety bulletin board, warning board, safety signal light and alarm bell. (2) The warning sign of "Stop, High Voltage Danger" shall be hung outside the door of the high-voltage distribution room and transformer room or on the safety column of the substation. The warning signs must face the outside of the fence. (3) There shall be obvious operation instructions on the high-voltage distribution device. The grounding point of the equipment shall have obvious signs. (4) There should be obvious signs of "safe passage" or "emergency exit" in the room. In addition, the layout design of substation and distribution equipment shall facilitate installation, operation, handling, maintenance, test and monitoring. High and low voltage distribution room, transformer room, capacitor room and control room should not have unrelated pipes and lines passing through. New energy vehicles should first focus on cities, but the busy IX region is often short of land, and the cost of land is high. In this regard, the government needs to give preferential policies to promote the construction of charging facilities. The development and operation of electric vehicle charging stations by electric power enterprises have inherent advantages.

Renhuai Electric Vehicle Maintenance Service Center

As China joins the ranks of "carbon neutrality", the global carbon emission reduction process continues to accelerate, and new energy vehicles have achieved leapfrog development in the world. Not only are new energy passenger vehicles surging worldwide, many companies in the transportation industry have begun to increase the use of new energy vehicles such as electric buses. New energy charging infrastructure should be taken into the fast lane. Some domestic independent brands began to target overseas markets. Among them, the industry leader TESTU stands out. With advanced products, flexible strategies and rich experience in going to sea, TESTU charging solutions have entered the public transport sector in various places to provide clean energy power for electric buses in many places. The sword is in hand, and the momentum of "winning" is rising

Renhuai Electric Vehicle Maintenance Service Center

In order to popularize the application in any industry, it is essential to continuously reduce the cost. This is especially true for photovoltaic enterprises that are still in the cold winter. Photovoltaic power generation was once very expensive, but driven by economies of scale, the cost of photovoltaic power generation has been declining in recent years, and now it is very close to parity. All this depends on the continuous innovation of photovoltaic technology. Theoretically, a 1 square meter sunlight exposure surface can generate 1000 watts of energy at most. If you want to increase the total reception of existing solar panels, you must focus the light, which will cause the panel to burn out due to excessive temperature.