Shibing Private Car Charging Pile Company
The function of the charging post is similar to that of the gas dispenser in the gas station. It can be fixed on the ground or wall, installed in public buildings (public buildings, shopping malls, public parking lots, etc.) and residential parking lots or charging stations, and can charge various types of electric vehicles according to different voltage levels. The input end of the charging pile is directly connected with the AC power grid, and the output end is equipped with a charging plug for charging the electric vehicle. Generally, the charging pile provides two charging methods: conventional charging and fast charging. People can use a specific charging card to swipe the card on the human-computer interaction interface provided by the charging pile to print the corresponding charging method, charging time, cost data and other operations. The charging pile display screen can display the charging amount, cost, charging time and other data.
Shibing Private Car Charging Pile Company
3. Power requirements: ① Input voltage: single-phase 220V; ② Output power: single-phase 220V/5KW; ③ Frequency: 50Hz ± 2Hz; ④ Allowable voltage fluctuation range: single-phase 220V ± 15%; 4. Electrical requirements: ① After the correct connection of plug and socket is confirmed to be successful, the circuit that can be opened and closed with load can be closed to supply power to the socket; ② The leakage protection device shall be installed on the incoming side of the power supply cable; ③ The protection of low-voltage distribution equipment and lines shall meet the relevant provisions in the Code for Design of Low Voltage Power Distribution (GB/50053); ④ For the distribution line of IT system, in case of ground fault, the insulation monitoring device shall send out audio or light signals. In case of the second phase to phase ground fault, the fault circuit shall be cut off by the over-current protection appliance or leakage current action protector; ⑤ In the lighting distribution system, the lighting and socket circuits should not be powered by the same circuit.
Shibing Private Car Charging Pile Company
According to the new national standard, the charging plug standard of different models in the future is the same. Xu Xinchao said, "Although there will be differences in voltage and power, theoretically it can be used in the same charging point. In addition, the new national standard attaches particular importance to the safety of the charging pile, which has always been the top priority. The standardized charging pile of new energy vehicles will automatically cut off power after charging, making breakthroughs in insulation and avoiding electric shock in rainy days, so as to avoid unnecessary dangers for new energy owners during charging. ".
Shibing Private Car Charging Pile Company
Not only does China attach importance to the development of new energy charging equipment, foreign new energy companies are developing more rapidly, and French oil giant Total is also actively building charging equipment. In the early years, Total acquired Saft, a battery manufacturer. This company originally produced power batteries and provided automotive batteries for many automobile manufacturers. And some foreign companies have even developed wireless charging technology. They transmit wireless energy through magnetic induction between the charging coil and the receiver. The charging coil is buried under the ground. When it needs to be charged, just drive the car to an appropriate position to charge. New energy vehicles are very popular in recent years. Because of the environmental protection of new energy vehicles, many countries advocate new energy vehicles, and many people are interested in new energy vehicles. The New Energy Vehicle Technology Analysis has relevant content. Obviously, the trend of fuel vehicles has gone.
