Where is Cenxi electric vehicle maintenance
DC type: a) Power input voltage of charging pile (plug): three-phase four wire 380VAC ± 15%, frequency 50Hz ± 5%; b) The charging pile (plug) shall meet the charging object; c) The output of the charging pile (plug) is DC, and the output voltage meets the battery system requirements of the charging object; d) Zui's large output current meets the charging requirements of battery system 1C of the charging object, and is downward compatible; e) The charging mode can be divided into conventional and fast charging modes. The conventional charging mode is 5-hour charging mode, and the fast charging mode is 1-hour charging mode (selected for different battery types); f) Realize intelligent IC management; g) Each charging pile (plug) is equipped with an operator for the user to select charging mode and guide operation, and display the battery status of electric vehicles and the user's IC card charge information to achieve unattended management;
Where is Cenxi electric vehicle maintenance
DC piles are the inevitable choice of public piles in the future: at present, the proportion of public AC and DC charging piles remains around 6:4, and the proportion of AC piles is more, mainly because in the early stage of the industry development, slow charging AC piles are very suitable for manufacturers to seize the market, relying on the characteristics of simple structure, mature technology and low cost, However, after the technology and market of charging piles become mature, DC piles are the inevitable choice for future public charging piles. The average charging time of the DC charging pile is 1 hour and 54 minutes. 85% of the users can finish charging within 2.5 hours, while the average charging time of the AC charging pile is 5 hours and 45 minutes. 66.2% of the users need more than 5 hours of lengthy charging time. The difference between the two nearly 4 hours of time directly determines the obvious use preference of the car owner Z.
Where is Cenxi electric vehicle maintenance
According to the new national standard, the charging plug standard of different models in the future is the same. Xu Xinchao said, "Although there will be differences in voltage and power, theoretically it can be used in the same charging point. In addition, the new national standard attaches particular importance to the safety of the charging pile, which has always been the top priority. The standardized charging pile of new energy vehicles will automatically cut off power after charging, making breakthroughs in insulation and avoiding electric shock in rainy days, so as to avoid unnecessary dangers for new energy owners during charging. ".
Where is Cenxi electric vehicle maintenance
The function of the charging post is similar to that of the gas dispenser in the gas station. It can be fixed on the ground or wall, installed in public buildings (public buildings, shopping malls, public parking lots, etc.) and residential parking lots or charging stations, and can charge various types of electric vehicles according to different voltage levels. The input end of the charging pile is directly connected with the AC power grid, and the output end is equipped with a charging plug for charging the electric vehicle. Generally, the charging pile provides two charging methods: conventional charging and fast charging. People can use a specific charging card to swipe the card on the human-computer interaction interface provided by the charging pile to print the corresponding charging method, charging time, cost data and other operations. The charging pile display screen can display the charging amount, cost, charging time and other data.
Where is Cenxi electric vehicle maintenance
In fact, in order to effectively develop the new energy vehicle industry, in addition to the problems exposed in the construction of charging piles, such as difficult site selection, power connection and property coordination, the integration of infrastructure resources, the unification of public charging facilities information platform, the standardization of charging interfaces, and the billing and settlement in the charging process also need to be solved. The charging infrastructure of new energy vehicles is a new type of urban infrastructure. Its construction is a systematic project involving land, power grid, electricity price, mechanism and many other links, which is also the reason why the charging infrastructure construction is relatively difficult. However, as long as the relevant parties meet each other and reach consensus, instead of talking to themselves and going their own way, these problems will eventually be solved.
Where is Cenxi electric vehicle maintenance
Not only does China attach importance to the development of new energy charging equipment, foreign new energy companies are developing more rapidly, and French oil giant Total is also actively building charging equipment. In the early years, Total acquired Saft, a battery manufacturer. This company originally produced power batteries and provided automotive batteries for many automobile manufacturers. And some foreign companies have even developed wireless charging technology. They transmit wireless energy through magnetic induction between the charging coil and the receiver. The charging coil is buried under the ground. When it needs to be charged, just drive the car to an appropriate position to charge. New energy vehicles are very popular in recent years. Because of the environmental protection of new energy vehicles, many countries advocate new energy vehicles, and many people are interested in new energy vehicles. The New Energy Vehicle Technology Analysis has relevant content. Obviously, the trend of fuel vehicles has gone.
