Guanghan Electric Vehicle Maintenance Project
At present, solar cells are divided into several types according to the raw materials, structures and manufacturing methods used. Among them, crystalline silicon solar cells mostly refer to monocrystalline silicon solar cells and polycrystalline silicon solar cells using silicon semiconductor substrates as raw materials; In addition, there are amorphous silicon solar cells, which are made by evaporating amorphous silicon on glass substrates rather than silicon substrates based on the same film preparation method as liquid crystal panels. Monocrystalline silicon solar cells form solar cells on monocrystalline silicon substrates, and there are also products with conversion efficiency up to about 20%, which have excellent performance and reliability. However, the price of silicon substrate as raw material is expensive, and the power generation cost per watt is high. Although the conversion efficiency of polycrystalline silicon solar cells is lower than that of monocrystalline silicon solar cells, they have the advantage of relatively low cost.
Guanghan Electric Vehicle Maintenance Project
How to properly charge in the hot link when using the charging pile of new energy vehicles? 1. Take care of your electric donkey and don't let it get sunburnt: in hot summer, you often sweat, and the rechargeable battery often "gets high fever". Here, it is recommended that the owner choose a place with a parking shed or a barrier to cover the electric vehicle as far as possible, and don't let the electric vehicle be exposed to the sun immediately, which will endanger the service life of the vehicle. In addition, fire accidents are very likely to occur under high temperatures. 2. Do not "steam up and cook down": the temperature is already hot. If the electric car is exposed to the sun at the moment, but you are charging the car, the rechargeable battery will generate heat in the whole process of charging. At this time, all cars are in the "steam up and cook down" mode, and you will "deploy" carelessly. 3. The electric vehicle must also take a proper "rest". 4. The charging time must be well controlled.
Guanghan Electric Vehicle Maintenance Project
In this environment, major automobile manufacturers in the automobile industry are also constantly shifting their focus to the research and development of new energy vehicle technology, and have also launched many new energy vehicles to replace oil with electricity and reduce emissions. This also represents the new direction of future automobile development. In China, friends who pay more attention to cars can see that more and more new energy vehicles are running on the road. More people are also aware of the benefits that new energy vehicles bring to the earth. The country is also introducing various preferential policies to vigorously promote the development of new energy vehicles. However, the main reason why some people are unwilling to buy new energy vehicles is the lack of endurance and inconvenient charging. However, with the continuous popularity of electric vehicles, these problems will certainly be solved in the future. Before that, the country also made a series of decisions to make it easier for everyone to charge cars in the future.
Guanghan Electric Vehicle Maintenance Project
9. Anti rust (anti oxidation) protection The iron shell of the charging pile (bolt) and the exposed iron support and parts shall be provided with double-layer anti rust measures, and the non-ferrous metal shell shall also be provided with anti oxidation protective film or anti oxidation treatment; 10. The wind protection charger installed on the platform and exposed parts shall be able to withstand the relative wind speed in different areas and at different heights specified in Table 9 of GB/T 4797.5-9 Natural Environmental Conditions for Electrical and Electronic Products - Precipitation and Wind; 11. The shell door of the anti-theft protection electric pile (bolt) shall be equipped with an anti-theft lock, and the bolt fixing the AC charging pile (bolt) must be installed or removed after opening the shell door; 12. The temperature rise requires that the AC charging pile (plug) operates continuously under rated load for a long time, and the temperature rise of internal heating elements and parts shall not exceed the provisions in Table 2 of Q/GDW 397 2009;
Guanghan Electric Vehicle Maintenance Project
The country attaches great importance to the development of new energy vehicle charging equipment, and all regions will naturally increase efforts to promote development. Taking Nanning as an example, it is estimated that by 2020, there will be about 21550 new energy vehicles in Nanning. In order to meet the charging needs of the majority of car users, by 2020, Nanning will need nearly 20000 charging poles and nearly 100 charging stations. At present, the development of electric vehicle public charging equipment in Nanning is still in the primary stage. At present, the number of electric vehicles and the number of charging piles are seriously unbalanced, and the phenomenon of vehicles without piles and piles without vehicles occurs from time to time. The main reason is that the all smart service platform has not been built yet and needs further improvement.
Guanghan Electric Vehicle Maintenance Project
What should be paid attention to when charging electric vehicle batteries? When the electric vehicle starts and goes uphill, it is necessary to avoid emergency braking and acceleration as much as possible, because large current discharge will be formed during this process, which will damage the performance of the battery. There are also two points that need special attention when stopping for a long time. 1. Parking without power supply should be avoided: unlike traditional gasoline vehicles, electric vehicles have their own "unique taste" for the state of vehicle parking. If the "hungry stomach" is used too long, it will "rebel". When the electric vehicle is parked in the case of power loss, the battery is prone to sulfation, blocking the electric ion channel, resulting in insufficient charging and declining battery capacity. 2. Deep discharge shall be carried out regularly: when the electric vehicle is almost out of power, undervoltage protection will automatically occur, but during this process, its voltage is unstable, and it will also be up and down, causing repeated undervoltage protection status
