Yibin private car charging pile service provider
AC type: Technical requirements for AC charging pile (plug) 1. Requirements for environmental conditions: ① Working environment temperature: - 20 ℃~+50 ℃; ② Relative humidity: 5%~95%; ③ Altitude: ≤ 1000m; ④ Installation site: outdoor; ⑤ Seismic capacity: ground horizontal acceleration 0.3g; Ground vertical acceleration 0.15g; The equipment shall be able to withstand three continuous sine waves under simultaneous action, and the safety factor shall be greater than 1.67; 2. Structural requirements: ① The shell of AC charging pile (bolt) shall be firm; ② In structure, it is necessary to prevent hands from easily touching the exposed part; ③ The AC charging post (bolt) shall be a steel composite structure with a thickness of more than 1.0, and the surface shall be treated with plastic immersion, and the requirements for heat dissipation shall be fully considered. The charging pile (bolt) shall have good shielding function against electromagnetic interference; ④ The charging pile (bolt) shall have sufficient support strength;
Yibin private car charging pile service provider
Not only does China attach importance to the development of new energy charging equipment, foreign new energy companies are developing more rapidly, and French oil giant Total is also actively building charging equipment. In the early years, Total acquired Saft, a battery manufacturer. This company originally produced power batteries and provided automotive batteries for many automobile manufacturers. And some foreign companies have even developed wireless charging technology. They transmit wireless energy through magnetic induction between the charging coil and the receiver. The charging coil is buried under the ground. When it needs to be charged, just drive the car to an appropriate position to charge. New energy vehicles are very popular in recent years. Because of the environmental protection of new energy vehicles, many countries advocate new energy vehicles, and many people are interested in new energy vehicles. The New Energy Vehicle Technology Analysis has relevant content. Obviously, the trend of fuel vehicles has gone.
Yibin private car charging pile service provider
Safety requirements (1) The substation shall be equipped with safety bulletin board, warning board, safety signal light and alarm bell. (2) The warning sign of "Stop, High Voltage Danger" shall be hung outside the door of the high-voltage distribution room and transformer room or on the safety column of the substation. The warning signs must face the outside of the fence. (3) There shall be obvious operation instructions on the high-voltage distribution device. The grounding point of the equipment shall have obvious signs. (4) There should be obvious signs of "safe passage" or "emergency exit" in the room. In addition, the layout design of substation and distribution equipment shall facilitate installation, operation, handling, maintenance, test and monitoring. High and low voltage distribution room, transformer room, capacitor room and control room should not have unrelated pipes and lines passing through. New energy vehicles should first focus on cities, but the busy IX region is often short of land, and the cost of land is high. In this regard, the government needs to give preferential policies to promote the construction of charging facilities. The development and operation of electric vehicle charging stations by electric power enterprises have inherent advantages.
Yibin private car charging pile service provider
When the charging post is built, it should be used and managed well. The implementation of management responsibility and clear operation mode can make the charging pile safe and reliable. At present, the charging pile is faced with the problem of unclear management responsibility and unclear operation mode. There are some problems such as the aging of distribution facilities in the community, who will pay for the reconstruction, the quality of piles is mixed, and who will solve the hidden fire hazards. The same is true of public charging posts. There are not many DC fast charging piles with high investment standards and high power, but "problem piles" and "zombie piles" are common. In recent years, the number of charging pile construction and operators in China has grown rapidly, but the level of enterprises is uneven.
Yibin private car charging pile service provider
There are four main pain points: A. Battery standardization is too difficult. The separation of vehicle and electricity first requires the standardization of power batteries, BMS standardization, interface standardization, and software management standardization. Any vehicle upgrade must be compatible with the previous generation of products. Battery standardization is too difficult. Every car company wants to make its own electricity exchange standard. It is unrealistic for so many car companies to unify. B. The investment is large and the cost is high. The replacement of power needs to lay a large network, and the investment scale is far greater than charging. Build a power exchange network for a city to provide special tram exchange services. The cost can be recovered only after at least 6-8 years or even more. C. The deflagration hazard of the power plant is large, and the safety hazard is huge. D. It is difficult to improve the customer experience.
Yibin private car charging pile service provider
The function of the charging post is similar to that of the gas dispenser in the gas station. It can be fixed on the ground or wall, installed in public buildings (public buildings, shopping malls, public parking lots, etc.) and residential parking lots or charging stations, and can charge various types of electric vehicles according to different voltage levels. The input end of the charging pile is directly connected with the AC power grid, and the output end is equipped with a charging plug for charging the electric vehicle. Generally, the charging pile provides two charging methods: conventional charging and fast charging. People can use a specific charging card to swipe the card on the human-computer interaction interface provided by the charging pile to print the corresponding charging method, charging time, cost data and other operations. The charging pile display screen can display the charging amount, cost, charging time and other data.
