Anshun Electric Vehicle Maintenance Model
Intelligent product: compared with traditional fuel vehicles, what is the core competitiveness of new energy vehicles? Intelligence seems to be the accepted answer. The reporter's visit found that more and more new energy vehicle enterprises have built a service system for the whole process of users' purchase and use of vehicles through the digital platform, and improved the digital life and after-sales service in the vehicle. From the perspective of configuration and performance, the new energy models of the three enterprises visited by the reporter have been able to achieve multiple functions such as car control, service and social networking with the help of the car machine system and APP, and the software upgrade and function iteration optimization can also be carried out after the car is sold, so as to realize the constant use and freshness of the car.
Anshun Electric Vehicle Maintenance Model
Over the past few years, China's new power vehicles have entered a new stage of development. Compared with the previous two years, its functions have entered a new stage. The environmental trend of new power vehicles has become more mature. Since the launch of new power vehicles, the national policies have been continuously supported, and friends have gradually taken over the new power vehicles, But do friends inquire about new power cars? The following editor will explain to friends what the policy of charging pile for new power vehicles is! Description of new power vehicle charging pile policy - brief introduction The threshold of awards for the city of atmospheric pollution in 2016-2020 The number of new power vehicles promoted is divided into no less than 30000, 35000, 43000, 55000, 70000, and the number of new power vehicles promoted accounts for no less than 3%, 4%, 5%, 8%, and 10% of the total number of new and updated vehicles in the inland area.
Anshun Electric Vehicle Maintenance Model
DC piles are the inevitable choice of public piles in the future: at present, the proportion of public AC and DC charging piles remains around 6:4, and the proportion of AC piles is more, mainly because in the early stage of the industry development, slow charging AC piles are very suitable for manufacturers to seize the market, relying on the characteristics of simple structure, mature technology and low cost, However, after the technology and market of charging piles become mature, DC piles are the inevitable choice for future public charging piles. The average charging time of the DC charging pile is 1 hour and 54 minutes. 85% of the users can finish charging within 2.5 hours, while the average charging time of the AC charging pile is 5 hours and 45 minutes. 66.2% of the users need more than 5 hours of lengthy charging time. The difference between the two nearly 4 hours of time directly determines the obvious use preference of the car owner Z.
Anshun Electric Vehicle Maintenance Model
Charging every day: For many commuters, it may be enough to charge the car once every two or three days. However, some experts suggest that you should not try to save time and charge frequently every day, so that the battery can be in a shallow cycle state, which is more conducive to extending the service life. Pay attention to the phenomenon of poor contact between the plugs at both ends of the charging line: poor contact will lead to the heating of the plug, and once the heating time is too long, short circuit may occur, thus damaging the charger and battery. Therefore, the owner needs to check and replace the connector in time.
Anshun Electric Vehicle Maintenance Model
9. Anti rust (anti oxidation) protection The iron shell of the charging pile (bolt) and the exposed iron support and parts shall be provided with double-layer anti rust measures, and the non-ferrous metal shell shall also be provided with anti oxidation protective film or anti oxidation treatment; 10. The wind protection charger installed on the platform and exposed parts shall be able to withstand the relative wind speed in different areas and at different heights specified in Table 9 of GB/T 4797.5-9 Natural Environmental Conditions for Electrical and Electronic Products - Precipitation and Wind; 11. The shell door of the anti-theft protection electric pile (bolt) shall be equipped with an anti-theft lock, and the bolt fixing the AC charging pile (bolt) must be installed or removed after opening the shell door; 12. The temperature rise requires that the AC charging pile (plug) operates continuously under rated load for a long time, and the temperature rise of internal heating elements and parts shall not exceed the provisions in Table 2 of Q/GDW 397 2009;
Anshun Electric Vehicle Maintenance Model
With the progress of people's life, consumers' requirements for cars are getting higher and higher, especially new energy vehicles. When consumers buy new energy vehicles, the first thing they should pay attention to is the battery and endurance of new energy vehicles, and then the charging of cars. Today, I will tell you about the charging pile of new energy vehicles. Is it GM? According to Xu Xinchao, the core of the charging national standard revision plan expected to be officially released in August this year is to standardize and unify the charging piles of new energy vehicles, and the charging sockets of different models will be unified.
